Nevada-class
Preliminary-design Pennsylvania-class
Pennsylvania-class
USS Mew Mexico before the Second World War
Dimensions 610 (water line) x 95,2 (outside plating) x 29,6 (mean) feet and a displacement of 31.300 tons. Block coefficient 0,640, longitudinal 0,652, midship section coefficient 0,982. Armament 4x3-14” guns, 22-5” quick firing guns and 4 submerged torpedo tubes. The reciprocating machinery and 16 boilers supplied 27.1000 ihp allowing a speed of 20,5 knots and with a speed of 10 knots a range of 8.000 nautical miles. The armament consisted of a main side belt with as extreme width 17’.4 5/8”, depth below waterline 8’6” and a thickness of 13½”, 13½”-8”, barbettes 4½” (light part)-13” (heavy part), turrets 5” (roof)-9” rear)-9/10” (sides)-18” (port), conning tower proper 16” just like the fire control, conning tower tube 6” (light)-16” (heavy), uptake protection 13”, protective deck total 120#(100# S.T.S. over 20# middle), splinter deck total thickness 80#slopes and 60# flats. Percentage waterline protection 0.836. Normal displacement of 31.300 tons: hull complete 12.946 tons, hull fittings 1.278 tons, protection 9.094 tons, steam engineering 2.090 tons, res. Feed 2/3 supply 180 tons, battery 1.550 tons, ammunition &2/3 ordinance stores 1.335 tons, equipment&2/3 equipment stores ad outfit&2/3 stores 1.025 tons, oil fuel 2/3 supply 1.445 tons and 357 tons margin.
Source
The so-called Spring Styles Book 1 (March 1911-September 1925). Naval History and Heritage Command. Lot S-584-11. Preliminary designs prepared by mostly civilians working at the Bureau of Construction and Repair (succeeded by the Bureau of Ships nowadays the Naval Sea Systems Command) under supervision of naval architects of the Navy Construction Corps. A major part of the drawings was presented to the General Board which advices the Secretary of the Navy. Scheme ‘I”.
Note
1. Pennsylvania-class consisted of the Pennsylvania and Arizona, preceded by the Nevada-class and succeeded by the New Mexico-class. Figures for the USS Pennsylvania.Displacement 28.626 (standard)-32.429 (deep load) tons and as dimensions 182,9-185,3 x 29,72 (waterline x 9,9 (deep load) metres or 600-608 x 97.6 x 29.3 feet. The 4 Curtiss ungeared and Westhinghouse geared steam turbines and 12 Babcock&Wilcox (later 1 Bureau Express and 4 White-Forster boilers) water tube boilers supplied 31.500 shp via 4 screws allowing a speed of 21,38 knots and a range of 6.070 nautical miles with a speed of 12 knots. Crew numbered 915-1.358 men. The armour consisted of a 20,3-34,3cm/8-13.8” thick belt, 3,8-7,6cm/1.5-3” thick decks. 20,3-33cm/8-13” thick bulkheads and the barbettes, gun turrets and conning tower protected by 20,3-33cm/8-13”, 12,7-45,7cm/5-18” and 40m6cm/16”. The armament consisted of 4x3-35,6cm/14” /45 guns, 22012,7cm/5” /51 guns, 4-7,6cm/3” /50 anti aircraft guns and 2-53,3cm/21” torpedo tubes.
